RE: [DMCForum] lowered front DMC profile

["Marc A. Levy" <malevy@xxxxxxxxxxxxx>]

I have a set of cut springs available, if someone wants to try them but
not destroy a set of stock ones.

The "standard procedure" was to swap the front and rear springs, then cut
the ones in the front (that came from the rear).  The results can vary
quite a bit.  I have seen a few cars with cut springs that were way to low
for my liking.


> -----Original Message-----
> From: Farrar Hudkins [mailto:fhudkins@xxxxxxx]
> Sent: Friday, November 22, 2002 5:43 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: Re: [DMCForum] lowered front DMC profile
> 
> 
> Mike,
> 
> A couple of possibilities exist:
<SNIP>
> I'm sure other vendors have kits (i.e. springs) available. 
> Other people
> have simply cut their stock springs, but the results from that type of
> alteration tend to vary from good to worse.
> 
<SNIP>

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

<<attachment: winmail.dat>>