Re: [DMCForum] Re: Fridge Run update. Good and Bad
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Fridge Run update. Good and Bad



Well you could just take out the back window and stick it through and put a
little red flag on the back.  Or tie it to the roof along the center line of
the car... 4ft segments would be OK cause I figured I would need to support
it every 4ft anyway and that could hide the cut lines.  But the 9ft section
needs to support a dynamic load and be smooth to prevent anyone from getting
caught, as they walk past...

1/8" sounds like more than enough material on the clutch.  You need to
forget Ford, they can only engineer 1 real car every 20-30 years.  When you
come down I will show you some properly engineered engine parts, Porsche
parts, and the engine my brother is rebuilding.

Andrei



----- Original Message -----
From: "content22207" <brobertson@xxxxxxxxxxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>
Sent: Thursday, January 08, 2004 4:24 PM
Subject: [DMCForum] Re: Fridge Run update. Good and Bad


> How do you envision us hauling brass pipe in a bunch of DeLoreans? Or
> were you anticipating 25 feet in little 2-3 foot segments?
>
> My DeLo's clutch is slipping -- perhaps I could bring the pipe in my
> truck (with a spare PRV *STILL* in the bed, if needed on the way
> down). Actually my new clutch showed up today. Are all Renault clutch
> discs this inordinately thin and flimsy? The friction pads are 1/8"
> thick, if even that. Where's Ford Motor Company when you need it?
>
> Bill Robertson
> #5939


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive