[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Hey Mike,


Having just played Sherlock Holmes with my fuel system, I’m intrigued with your problem.


First, a few questions- Was the car running well 8 years ago? When you cleaned the fuel tank, did you find any sugar or other junk? Ethanol can decompose to sugar crystals. Did you test the spray pattern of the injectors before you originally cleaned them? If so, how did it look? Has the tamper-proof mixture screw been exposed? How about those 3 brass screws on the manifold? Are they seated as they should be?


Based on the length of time the car sat without being prepped for sitting and your symptoms, it sounds like the fuel system is fouled. I would look at the small things- the intake screen on the CPR, the little o-rings on the primary pressure regulator located on the fuel distributor, the fuel filter (you didn’t mention that at all).


One more thought- the lambda system is all about emissions via mixture control. Unplug the electrical connection to the frequency valve and to take it out- if the hardset mixtures are correct, you’d be able to run without it. If nothing changes, it’s not a part of the problem.


Good hunting!


Eric Itzel

Vin 4433


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe


Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive