Re: [DML] used frame?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] used frame?

I'm in the process of rtestoring my 5th frame now. I get the epoxy 
professionally stripped either chemically (preferred) or in an oven 
(okay but leaves ash inside the enclosed sections). Then any welding is 
done and the frame galvanised and powder coated. Galvanising sees the 
flat sections get a little warped but the important dimensions of the 
frame remains good. Ed Uding has been galvanising frames for ages and 
AFAIK has never had a problem with warping.


On 28/06/2013 04:25, deloreanernst@xxxxxxx wrote:
> I'm moving toward redoing my frame. It might be easier to swap it out, if mine proves to be too rusty, after I get to see it naked. A new one is not in the budget. Any thoughts, anyone? Powdercoating? Cost? Whatever. Mine is for the manual tranny.
> -Wayne
> 11174


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive