Re: [DML] Re: Toll Window Placement in Carrier

["Martin Gutkowski" <martin@xxxxxxxxxxxxxx>]

Hi Jeff, it does work well - I've used it several times ;-) if you're interested, I have a video on youtube showing how the uprated window regulators should be installed - just do a search for "mgutkowski delorean window"

Best Wishes,

Martin  


Sent from my BlackBerry®

-----Original Message-----
From: "drjeffcooke@xxxxxxxxxx" <drjeffcooke@xxxxxxxxxx>
Sender: dmcnews@xxxxxxxxxxxxxxx
Date: Fri, 27 Apr 2012 03:37:24 
To: <dmcnews@xxxxxxxxxxxxxxx>
Reply-To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Toll Window Placement in Carrier

Martin,

This is going to work really well.  I got the carrier in again tonight and I'll be able to manually run it up & down the rails, and then adjust the rails to avoid any 'jumping' problems.  Then I'll hook up the motor and adjust the motor position. The finally, as you've suggested place the window in the frame and bring the carrier up to it.  I've tried out the procedure without the adhesive.

Thanks
Jeff
#6313

--- In dmcnews@xxxxxxxxxxxxxxx, "Martin Gutkowski" <martin@...> wrote:
>
> Fit the carrier back in the door with a line of adhesive in it, run it down into the door.
> 
> Then install the glass and run the carrier up to meet it. Leave overnight.
> 
> Bingo, perfect alignment
> 
> Martin
> 
> Sent from my BlackBerry®
> 
> -----Original Message-----
> From: "drjeffcooke@..." <drjeffcooke@...>
> Sender: dmcnews@xxxxxxxxxxxxxxx
> Date: Thu, 26 Apr 2012 03:42:32 
> To: <dmcnews@xxxxxxxxxxxxxxx>
> Reply-To: dmcnews@xxxxxxxxxxxxxxx
> Subject: [DML] Toll Window Placement in Carrier
> 
> I (finally) got the toll window glass to release from the carrier.  There was a black rubber/adhesive that just didn't want to let go.  Anyways now I can see both dimples in the glass.  When I put the glass in the carrier,the dimples are about 1/4 wider on each side than the metal tabs in the carrier.
> 
> Is the correct placement of the glass to have an equal gap between the metal tabs (on the carrier) and the dimples?
> 
> Just FYI - Prior to taking it out one dimple (rearmost one) was just under the end of the metal tab and the other (foremost one) was about 1/2 gap from the tab.
> 
> Thanks
> Jeff #6313
> 
> 
> 
> ------------------------------------
> 
> To address comments privately to the moderating team, please address:
> moderators@...
> 
> For more info on the list, tech articles, cars for sale see www.dmcnews.com
> 
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links
>




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links





------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/