[DML] Toll Window Placement in Carrier
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Toll Window Placement in Carrier

I (finally) got the toll window glass to release from the carrier.  There was a black rubber/adhesive that just didn't want to let go.  Anyways now I can see both dimples in the glass.  When I put the glass in the carrier,the dimples are about 1/4 wider on each side than the metal tabs in the carrier.

Is the correct placement of the glass to have an equal gap between the metal tabs (on the carrier) and the dimples?

Just FYI - Prior to taking it out one dimple (rearmost one) was just under the end of the metal tab and the other (foremost one) was about 1/2 gap from the tab.

Jeff #6313


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive