[DML] Source for fuel distributor plunger o-rings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Source for fuel distributor plunger o-rings



Hi, 
Where are there sources to get this o-ring? Should I use Viton? What size is it? I found a Danco o-ring at a Ace hardware that appears to fit and work (5/16 X 3/16 X 1/16). My fear is that I may not hold up to gasoline and the pressures in this system. I would like to find a place to buy several of these to have for spares without buying a kit.
Thanks,
Daryl 
Vin 05017

[Non-text portions of this message have been removed]



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated