[DML] Flux Door Update
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Flux Door Update



To All,

I know you’re all anxious to get back to 1955 so here’s the update on the Flux Doors:  When I estimated that these would take about six weeks to complete, I had expected about 10-15 orders for these. To my amazement, I received more than 40. That’s a lot of fluxing work to do! However, the good news is they are almost finished. The primary hold-up has been the very cold weather we have been having up here in Boston this winter. I need to spray both paint and adhesive to finish these things up. Unfortunately, I need to have my garage well ventilated (because of the fumes) and warm enough for the adhesive to work and the paint to stick and dry. If I open the windows it is way too cold and I can’t use a portable heater because the fumes are flammable. So basically, we’re just waiting for a few warm days so I can finish these. I apologize that I had not considered this issue before but the last time I built these, it was summertime and it just didn’t occur to me this time around. (Sorry about that) Anyway, all of the parts have been fabricated and the circuit boards are done and they are just waiting for paint, upholstery and final assembly. They are really looking good as these units have MANY improvements over the first run originals.  Today is about 36 degrees but I hear we’re supposed to get a few days this week in the 50s... Still a little bit cold but just warm enough if I bring them in the basement after spraying to dry. So please be patient, they are almost finished. Stay tuned....

Steelwings
#1559





[Non-text portions of this message have been removed]



------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    dmcnews-digest@xxxxxxxxxxxxxxx 
    dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive