Re: [DML] Exhaust re-work
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Exhaust re-work

Did you replace the studs the first time around? Did you use copper slip 
when reassembling the last time? If the answer to both of these is "no" 
then you may regret it :-(


Richard wrote:
> About 6 years ago, I replaced my blown head gaskets. The exhaust gaskets were also trash so I removed the heads with the exhaust manifolds attached. Since the heads were off of the engine, it was a simple task to remove the exhaust manifolds and replace the gaskets.
> 6 years later, I have a blown exhaust gasket. The head gaskets are fine so I have no need to remove the cylinder heads. In the cramped confines of the engine bay, what are the preferred methods of removing the exhaust manifolds? The fasteners are pretty badly rusted. I'm betting that the studs will come out rather than the nuts coming loose from the studs. Advice is appreciated.
> Rich A.
> #5335


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive