[DML] Re: Details on VIN...570 restoration

["d_rex_2002" <rich@xxxxxxxxxxxxxxxxx>]

OK, trying to compare DeLorean Torsion Bar reverse engineering 
to sheet metal fabrication is NOT THE SAME (or even similar).

Having talked to Chris N. extensively about VIN...570's complete
restoration, I do not recall any specific emphasis on "SO GOOD"
or "so finely done" and certainly NO use of the word "prototype"
(this word used inaccurately regarding VIN...570 in the past)

The actual text (PJ Grady UK website) about the adapter plate:

"In all fairness, the template for the conversation which we 
found worked well and all that was required was a drill hole 
for the selector cable. We're not sure if this kit was from 
the Dunmurry factory or a previous owner."

(we report...you decide)

It is also important to note that VIN...570 has not yet been
made road-worthy, so the adapter plate (which "fits") has not
been fully tested (or driven at all, yet) after installation.
I guess when Chris drives it, we will know how good it is.

Later,
Rich W.




--- In dmcnews@xxxxxxxxxxxxxxx, "cbl1739" <cbl302@...> wrote:
>
> I remember when I R&D the adapter for going from a auto frame and converting it to a Standard Shift frame I was pleasantly surprised when One of the MAJOR Delorean Vendors in one of his Articles on his websites said my conversion was SO GOOD,so finely done(R&D,and worked excellent that he assumed it was most likely a FACTORY Prototype item...Surprised him when I explained it was my creation(see story on Vin 570)....my main point when people try them out and they work Better than original...people will post how great they are......
> 
> Claude




------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/