[DML] Re: angle drive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: angle drive

--- In dmcnews@xxxxxxxxxxxxxxx, Farrar Hudkins <fhudkins@...> wrote: 
> My speedo needle has been bouncy ever since I bought the car over
> 5,000 miles ago, but it hasn't got more or less bouncy that I can
> tell. Should I start saving my pennies for a new angle drive, or are
> all DMC speedo needles bouncy to a certain extent?
> Farrar Hudkins
> #2613
While driving in the US the speedo needle of 6513 bounced up and down from 65 to 75. Never could know the real speed, if I didn't have my nav system in the car. Even after DMCH did grease the angle drive.
Bouncing is gone now, after I have greased the lower and upper cable.

So you may want to do that first. I used bicycle bearing grease which is softer than bearing grease for cars. You could try that.



To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive