Re: [DML] rheostat
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] rheostat

I'm not sure anyone fully answered your rheostat question, so I will give it my best explanation.  If you look at the prongs on the rheostat, you will see four connectors, but they are tied together in two pairs.  When you reconnect the wires, just make sure the two red/orange connectors are attached to the same connector pair.  The red wire connector goes to the other pair.  The rheostat is nothing more than a variable resistor that you can change the resistance to the circuit with.  Hence, full power in on one side, variable power out on the other.  Hope this is clear.

--- On Sun, 10/12/08, John Podlewski <john_podlewski@xxxxxxxxx> wrote:

From: John Podlewski <john_podlewski@xxxxxxxxx>
Subject: [DML] rheostat
To: dmcnews@xxxxxxxxxxxxxxx
Date: Sunday, October 12, 2008, 9:02 PM

Anyone know which wires hook up to the rheostat?
I got a new shift plate and forgot in which order the three wires go to. Red, red/Orange and so on. There are four places for the three wires.


[Non-text portions of this message have been removed]




To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive