RE: [DML] Machined lower control arms and Eibach setup

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

I have also heard that people have had trouble with the Eibach working also.
John'


-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Peter Kirchgessner
Sent: Wednesday, September 24, 2008 12:31 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Machined lower control arms and Eibach setup

John,

yes, these are the arms I am talking about. Since the Eibach springs
are not as long as the original springs, now the shocks have a
different angle when mounted in the arms. The Eibach shocks have a
diameter of 48 mm (1.9 inch) and are definitely too thick. The Nissan
shocks are thinner (I can't get the diameter now), but are still too
thick. Maybe the combination Eibach springs and original shocks will
work. Can you tell me the diameter of the original shocks ? Then I can
compare it with the Nissan shocks.

Kind regards

Peter
 
[moderator snip]

------------------------------------

To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/