Re: [DML] Pulling Transmission
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Pulling Transmission

I think the 17mm are holding the bell housing to the transmission across the bottom. From what everyone says I think the 11mm that I am looking for are farther back between the frame. I am off this weekend and plan on getting under there again and finishing this thing. Thanks Martin for the spanner tip. I have some of those but not in 11mm... Looks like I have to go shopping..


  ----- Original Message ----- 
  From: Marc Levy 
  To: dmcnews@xxxxxxxxxxxxxxx ; steve@xxxxxxxxxx 
  Sent: Tuesday, May 27, 2008 10:01 PM
  Subject: Re: [DML] Pulling Transmission

  17mm? I don't think that is even possible! They are
  small, 10 or 11mm.

  The bolts are almost impossible to see. As I said,
  you can feel them if you run your finger along the
  front of the bell housing between the back of the
  frame and the transmission.

  I just swapped the trans this past weekend, so my
  memory is very clear on this!! :)

  --- Steven Alves <steve@xxxxxxxxxx> wrote:

  > Thanks, I received a few replies off list also and
  > have located the side 
  > cover. The bottom cover has me stumped. I found four
  > bolts on the bottom but 
  > they were 17mm and look like they connect the bell
  > housing to the tranny. I 
  > am guessing the ones I need to remove are somewhere
  > above the bottom frame 
  > crossover. I need to get a better look. Nothing like
  > laying on your back 
  > with jack stands holding the car up.
  > Steve
  > #2700
  > ----- Original Message ----- 
  > From: "Tom Neiland" <tneiland@xxxxxxxxxxx>
  > To: <dmcnews@xxxxxxxxxxxxxxx>
  > Sent: Sunday, May 25, 2008 7:20 PM
  > Subject: RE: [DML] Pulling Transmission
  [mod snip]


[Non-text portions of this message have been removed]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive