Re: [DML] Pulling Transmission
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Pulling Transmission

17mm?   I don't think that is even possible!  They are
small, 10 or 11mm.

The bolts are almost impossible to see.  As I said,
you can feel them if you run your finger along the
front of the bell housing between the back of the
frame and the transmission.

I just swapped the trans this past weekend, so my
memory is very clear on this!!  :)

--- Steven Alves <steve@xxxxxxxxxx> wrote:

> Thanks, I received a few replies off list also and
> have located the side 
> cover. The bottom cover has me stumped. I found four
> bolts on the bottom but 
> they were 17mm and look like they connect the bell
> housing to the tranny. I 
> am guessing the ones I need to remove are somewhere
> above the bottom frame 
> crossover. I need to get a better look. Nothing like
> laying on your back 
> with jack stands holding the car up.
> Steve
> #2700
> ----- Original Message ----- 
> From: "Tom Neiland" <tneiland@xxxxxxxxxxx>
> To: <dmcnews@xxxxxxxxxxxxxxx>
> Sent: Sunday, May 25, 2008 7:20 PM
> Subject: RE: [DML] Pulling Transmission
[mod snip]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive