[DML] Re: Pulling Transmission
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Pulling Transmission

Look in section 411 of the parts manual - have you removed the 
flywheel protector plate (16)?

Harold McElraft - 3354

- In dmcnews@xxxxxxxxxxxxxxx, "Steven L. Alves" <steve@...> wrote:
> I am in the middle of pulling the manual transmission to replace 
the clutch and can not get it out. It feels like it is still attached 
to the engine. I have the 4 big bolts, 3 at the starter and 2 on top 
out (trans mounts and linkages are also out with a jack under the 
tranny). I see mention of two covers on the bottom and driver side 
but can not find them. Has anyone seen any pictures describing the 
process? I am looking at the shop manual and see no mention of having 
to remove a plate prior to dropping the transmission. It does mention 
a "flywheel protection shield" in step 10 but that is after lowering 
the transmission. I can't figure out what I am missing. Has anyone 
seen any photos of the process I can look at or have any ideas what I 
may be missing?
> Thanks
> Steve
> #2700
> [Non-text portions of this message have been removed]


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnewsYahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive