Re: [DML] Re: check your trailing arm bolts, people...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: check your trailing arm bolts, people...

Just to clarify: That bend was caused by an accident, it wasn't "normal" 
wear and tear, and I think it's fair to suggest that a "normal" bolt 
would have broken long before this one was removed. It was an Inconel 
bolt too.

The arms have gone back on with poly bushes from Ed Uding, and Toby 
TABs. This is the joint that bolt came from:

The chassis has been galvanised and powder-coated by the same people who 
did the one featured on the Explodaview poster.


Toby Peterson wrote:

>Sean - That looks to be the worst one that I have seen (personally or 
>in a photo) with the exception of the one that broke in two on my car.  
>This was the incident that got me fired up about the trailing arm 


To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive