[DML] FUEL VENT TUBE

[mike clemens <rmclemns@xxxxxxxxx>]

My question concerns the fuel vent tube (#106683) that
is installed in the fuel tank.  I understand why you
need a vent system on the fuel tank, what I am
wondering about is why there is 24 inch long, 3/16
inch diameter (copper?) solid wire attached to the
plug that fits into the vent hole of the tank??

When properly inserted into the tank, this wire is
routed to the aft center of the fuel tank and is free
to rotate approximately 20 degrees left and right. 
The wire is permanently swedged or soldered to the
vent plug, so it cannot be removed from the plug
itself.

What purpose does this wire perform?  The manual has
nothing about it, that I have been able to find.

Mike   TPS    1630


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/