[DML] Re: Valve cover & Air Flow gaskets
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Valve cover & Air Flow gaskets

This is great....what I've been thinking since I first saw my paper 
gaskets.  Can you make them for the air intake elbow?

--- In dmcnews@xxxxxxxxxxxxxxx, "John Hervey" <john@...> wrote:
> Group, 
> Just in case you haven't seen my new valve cover gasket and air 
> meter gasket well here they are:
> http://www.specialtauto.com/delorean-parts/engine.html
> I was tired of buying the standard thin hard paper in most cases 
> gaskets and wondering if they were going to seal or not so I have 
> them.
> We made the gaskets from CS301 material which you can read about on 
> site. The valve cover are 0.32 thick which is normally twice as 
> in most cases, and with the rubber base will compress when you 
> down. Remember with 7mm no more than 15 lb's of torque.
> The air flow meter gasket also made out of the same CS301 material  
> at the same thickness of .016 as to not throw off any tolorences.
> I am now shipping the new gaskets with all the kits.
> John Hervey
> www.deloreanautoparts.com
> www.specialtauto.com

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive