[DML] Finicky start issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Finicky start issue

I replaced my cold start valve a couple of days ago, because I had to 
crank the car more than several times to start it when cold.  It 
seemed to fix it, but this morning, the car started right up, took it 
down the street about a mile to the post office, turned the car off.  
When I started it after dropping off my letter, it took several cranks 
to start it again.  However, the car started fine a few other times 
today so far. So I'm not sure what is happening, and why is starts 
instantly sometimes (cold or hot), but then after turning it over 
several times this morning.  Could it be the thermotime switch?  I 
haven't replaced that yet.



To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive