[DML] Re: Crossgate Adjustement
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Crossgate Adjustement

The control adjustments for the 5-speed are in the Workshop Manual
To shift into reverse you must LIFT the gearshift knob as you shift
into reverse. Before making adjustments make sure everything works
nice and freely. If you have to, disassemble, clean, lubricate, and
reassemble. This is especially applicable to the bell-crank. Also make
sure the rubber bushings in the links are not worn out or missing
before attempting to adjust. Another thing to look for is the bolt on
the transmission holding the link that rotates on it. I have seem them
stiffen up so that you can't shift at all.
David Teitelbaum
vin 10757

--- In dmcnews@xxxxxxxxxxxxxxx, "cummil2dmc" <liam@...> wrote:
> I am trying to find the Crossgate adjustment , No reverse at the 
> moment , Any direction to the adjustment would be appreciated
> regrads

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive