Re: [DML] Broken torsion bar
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Broken torsion bar

I have read with great interest about torsion bars. Hard to  believe that 
Houston doesn't stock them. As for the welding, yes they can be  welded. Steel of 
any kind can be welded. All that is required is that the proper  rods, and 
procedure is used. A good welder who is qualified with the rod and  procedure 
can make the weld and with proper post heat treatment and skill the  weld will 
be as strong or stronger than the rest of the rod. Welding is what I  have done 
for a living for over 40 years. I am not a great Delorean repair man  but I 
can weld.
Andy Blackmon  3513

************************************** See what's free at

[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive