[DML] Re: speedometer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: speedometer

It may not be either one. The speedo on my car went out once too (I
started having a wobbling needle on my speedo first, then it wouldn't
move at all). Turned out it was just a bad Dust Sheild. The square
hole had worn itself round, and wouldn't grip the Angle Drive Input
any longer.

If by chance you DO have a broken cable, it would most likely be the
Lower Cable. You should have a bracket mounted to the steering knuckle
that keeps the lower cable lifted up, and prevents it from binding.
Without that little wire bracket, it can shorten the life of said
cable significantly.

vin 6585 "X"

--- In dmcnews@xxxxxxxxxxxxxxx, "andy" <andyblackmon@...> wrote:
> Tonight my speedometer quit working. I suspect either the angle drive 
> or lower cable. Is there a way to test to see which one? Or am I better 
> off just to go ahead and replace them both. I know of course it could 
> be upper cable or even the speedometer it self. I am looking for advise 
> here.
> Thanks, Andy Blackmon 03513

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive