[DML] Std. Trans Linkage & Hard 1st Gear
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Std. Trans Linkage & Hard 1st Gear

The pivot bolt (item#100277) that holds the transmission linkage to the frame (item #15 on the parts manual 4-2-0 4-Transmission Shift Linkage - Manual) came loose while that car was on a transport trailer.  I was able to get the car onto a lift and reinstall the bolt.  I tightened the bolt and it became very hard to shift.  When I loosened the bolt a little, it worked better.  I was wondering, is there a torque spec on this bolt?  Should I put locktite on the bolt to prevent it from coming loose again?




[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive