RE: [DML] Safely Removing Upper Door Panel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Safely Removing Upper Door Panel



Hi Rob,

 

I have recently removed both upper and lower parts of
both doors to get to the solenoids.

I worked from the from end rear end of the upper panel,
gently pulling it upwards until the fir trees give way.

Then work towards the middle of the panel.

Yes, it helps to have the window down, but it can be
done with the window closed.

It's a tight spot then and your fingers best be thin as
they get a lot of pressure when some firs are still
locked in place.

Should work for you too.

 

Welmoed.

 

Vita contin git. Vive com eo.

 

From: dmcnews@xxxxxxxxxxxxxxx
[mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of Rob
Greenhaw
Sent: vrijdag 9 maart 2007 06:27
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Safely Removing Upper Door Panel

 

Does anyone have any suggestions on how to safely remove
the upper door panel when your window will not go down?
I need to get in there to investigate what needs to be
done inside; the manual says to do the window down and
then pull up on the panel but my driver's side window
does not roll down. The motor makes that clickety sound.
I don't want to hurt the firtrees or bend the panel's
bottom tabs so what is a safe alternative to the usual
way?

Thanks,
Rob Greenhaw
VIN 791
"LUKITME"

---------------------------------
No need to miss a message. Get email on-the-go 
with Yahoo! Mail for Mobile. Get started.

[Non-text portions of this message have been removed]

 



[Non-text portions of this message have been removed]



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated