[DML] Re: Aligning Latch Pins
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Aligning Latch Pins

Hey David,

Thanks for the response!

So, just to make sure I'm getting this right, the hinges should be 
square all the way around...in other words the front and back hinge 
should be at the same level...correct?  

I just want to make sure as I have a bunch of those door hing shims and 
I tried using the bunch that came out from under each hinge...but it 
looks like things shifted a bit after I reinstalled the roof support 

Then, adjust the arch with the torsion bar and strut installed?  

As it stands now, I need to realign the hinges like you said, then I'll 
have a better chance of realigning the doors.


Vin 3323 

--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@...> wrote:
> To answer you question about aligning the striker pins, aka, latch
> pins, it is not easy. The torsion bar should have been adjusted 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive