[DML] Re: Angle Drive Installation (Strange Things)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Angle Drive Installation (Strange Things)



Ah yes, leverage.  I also experienced the issue of not being able to 
get the proper leverage to loosen the nut when I replaced my angle 
drive.  I ended up using a hydraulic jack under the wrench handle, 
it worked perfectly.  Give it a try.


Sandor
# 3002

 

--- In dmcnews@xxxxxxxxxxxxxxx, "marv2020" <marv2020@...> wrote:
>
> Team,
> Need help, bought the new Angle Drive kit from DMC to fix my 
> speedometer, I even read the instructions (multiple times). But 
some 
> strange things are occuring. 1.) The instrictions say you need a 
32mm 
> socket, Mine's need's a 36mm. Is this a typo or  was mine changed 
> sometime in the past?  Ok, I got it lose, using a 36, but the back 
nut 
> (1 1/4) will not budge and I'm nut sure which way to apply force, 
up 
> or down, i.e up-being counterclockwise, looking at it from the 
> driver's side or down-being clockwise -looking at it from the 
driver's 
> side. There's very little room under the there to get the 
leverage, 
> any suggestions or tools to get the leverage I need in this tight 
> spot? 
> Thanks in Advance.
>






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive