RE: [DML] To Cut or Not to Cut..Front Dash for Radio

[Marv Williams <marv2020@xxxxxxxxx>]

I'm going to cut...may God have mercy on my soul. I've pulled the old radio,  I have a clear view into the dash.. my plan is to cut the old wiring harness from the Craig radio,  and rewire the old harness to my new radio speaker/power wires. This way  I can just plug it back into the existing radio connection. I'm leaving the dash in place within the car, but will buy a brand new metal blade for my jigsaw and lay down  plenty of plastic to cover debris. I've heard that I should make the opening slightly less then the radio frame that holds the new radio, so that it will be tight. Any other advice before I start this delicate surgery? I'm not sure how the radio frame will have solid connection to the dash? Thank you everyone.





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/dmcnews/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:dmcnews-digest@xxxxxxxxxxxxxxx 
    mailto:dmcnews-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/