Re: [DML] Fuel system pressure questions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Fuel system pressure questions

You'll need to jump past the RPM relay to have the pump run more than a 
second or two.  The best way to check is to hook up the injectors and 
all of the fuel distributor, take ALL the injectors out of their ports, 
point them outwards, jump the relay, and press down on the air flap. 
Each injector should spray a conical mist, the volume of which is 
proportional to the deflection of the flap.  Since you've already 
replaced the injectors, any variance from ideal will surely be the fault 
of the f/d.
We have them too.

Warren Wallingford
DeLorean Motor Company (Texas)
15023 Eddie Drive
Humble, Texas 77396 USA
281/441-2813 Fax

Charlesdos Mavor wrote:
> I have had the car apart for 18 months. I did VOD work, all new in the 
> tank, filter, new injectors, and new SS lines. I wanted to clean out 
> the fuel distributor so I put in about 1/4 tank of gas and turned the 
> key to pressurize the system. Some fuel did come out (not much) I was 
> looking for some real pressure. Before I hook up the lines to the 
> injectors I want to know if this sounds right.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive