[DML] Re: Belt Sander on Stainless?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Belt Sander on Stainless?

To the DML.
As far as regraining stainless please go to Message number 46668.
Type 46668 in that little search box.

On my way to see the Harold E. LeMay car collection on Saturday, 
August 26, 2006.
They have one DeLorean in the collection.  Don't know the VIN 
number.  Maybe this time I can sneek over to the D and write down 
the VIN.
They also have one 1948 Tucker 48 4 Door Sedan.
But, it doesn't have gull wing doors.

Mark R. Vanyo
VIN 02261

--- In dmcnews@xxxxxxxxxxxxxxx, "birdwell77095" <birdwells@...> 
> I know that when one regrains the stainless one must go with the 
> grain. I've heard you should go in one direction only. Can a belt 
> sander be used? If so what grit? 80?
> Shannon
> VIN 16113

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive