Re: [DML] Orifice Tube
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Orifice Tube

Paul.. What did you find?  I found a simple fix for the intake below  the 
windshield.  Carefully remove the grill below the windshield and cement  some 
fiberglass screening ( Hardware stores carry the screening for replacing  window 
screens) to the back of the grill section that fits over the  opening.  It is 
a cheap, simple fix that will prevent all sorts of stuff  from going into the 
opening.  I used a fine black screening and it is  almost impossible to see.  
In a message dated 7/6/2006 10:50:49 P.M. Eastern Standard Time,  
paul.sweet@xxxxxxxxxxxx writes:

I'll reply to my own message. I ended up taking out the evaporator by  
the book, and removed center console, glove box, kneepad, etc. Took  
out the entire heater/AC box. What a bitch job that is! I hope I 
can  remember and backtrack my steps to get it all back together  again.


[Non-text portions of this message have been removed]

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive