Re: [DML] Orifice Tube
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Orifice Tube

Replying to an old post.  I, too had trouble with my orifice tube 
stuck in the pipe.  I drilled it out, but with it, a hole through 
through the avaporator tube as well!  I just ordered a new 
evaporator.  Can anyone piont me to some good step by step 
instructions for replacing the evaporator?  I got eight of the eleven 
casing screws out.  Any tips in dropping the evaporator out?


--- In dmcnews@xxxxxxxxxxxxxxx, Warren Wallingford <warren@...> wrote:
> Worst. Job. Ever.  Orfice tubes never come out in one piece.  
> Just stay at it.  Use lots of WD-40 and the thinnest pliars you can 
> find.  If you want you can use a sharp pick to get some of the 
> tube guts off the side of the pipe, but be careful not to poke a 
hole in 
> the that tube-it's aluminum.  Leaky evaporators are very 
> I don't think sobriety is necessarily a requirement for this job, 
> patience is.
> Warren at DMC
> Michael & Denise wrote:
> > Has anyone had experience removing a stuck orifice tube in the AC 

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive