[DML] Re: Dash Light Rheostat

["Marv Hein" <marvhein@xxxxxxxxxxx>]

Ben,

Pretty nice from guys who could have just said, "Buy a replacement 
from us!"

After reviewing the directions, I removed the rheostat from the car, 
superglued the disk in place on the post. The stops are still intact.

I superglued the black plastic "finger holder" back in place since 
the end tabs had broken off when I originally tugged too hard on the 
wires.

Reconnected the wires and tested.  Worked!

Everything is reinstalled and working great.

Thanks again to those who offered suggestions on and off list.

Marv
#10820
AZ-D

--- In dmcnews@xxxxxxxxxxxxxxx, "Shipping Department" <shipping@...> 
wrote:
>
> Take a look at delorean.com in the tech notes. There is a section 
about repairing your rheostat.
> It should explain how to put it back together properly. However if 
you've broken the black plastic 
> that holds the "little copper fingers" you'll probably still have 
improper operation. If you still need assistance feel free to contact 
me directly.
> 
> 
> 
> Benjamin Shrum
> DeLorean Motor Company
> (281)441-2537 ext 104









To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/