[DML] Re: Powdercoated DMC frames experience anyone?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Powdercoated DMC frames experience anyone?



Zinc coating, aka galvanizing, is not a great option. You have to find
someone with a tank large enough to dip the frame in, it adds a LOT of
weight, it messes up all the holes which have to be drilled/tapped
out, you have to cut open any areas that can trap the molten zinc, and
the frame can distort from the heat. Before doing zinc I would
consider powder, no distortion and much less weight.
David Teitelbaum
vin 10757 



-- In dmcnews@xxxxxxxxxxxxxxx, "dmc01081" <rgoodwin2001@xxxx> wrote:
>
> Have you considered a galvanized frame as an option?  My frame was 
> galvanized in the early 90's by the original owner and survived 
> Kansas City in the winter for over 10 years as a daily driver.  Is a 
> great article in Delorean World on the frame change out.  I do not 
>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive