Re: [DML] Re: Raising the seat height
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: Raising the seat height

I installed washers up to 1/2" thick under only the front studs about 20 
years ago. This added thigh support and made those long cross country drives 
more comfortable.

Bruce Benson

> The quick and dirty way would be to stack some washers under the seat
> on the mounting bolts. If you look under the car you'll see four nuts
> on 4 studs that come down thru the floor. Take the nuts off and lift
> the seat out (run it all the way forward to clear the seat belt
> bolt). Normally they stick out about an inch, so you could easily
> raise the seat up to about 1/2 inch this way.
> Dave Swingle (6'4", no seat problem)

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive