[DML] Re: Angle Drive Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Angle Drive Removal



If you get the angle drive and nut from PJGrady, they send 
instructions. I have never done it before and it took about 1/2 an 
hour to get the old off, and the new one on.

Otherwise, i could prolly mail you the info.

Sean

--- In dmcnews@xxxxxxxxxxxxxxx, "Shain" <dsmguy@xxxx> wrote:
>
> Could anyone tell me how to safely remove the angle drive.  I have 
my hub
> assembly off of my car to install some new bearings,  and would like 
to
> remove the drive so I can por-15 the hub.  Thanks a lot.
> 
> -Shain
>








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive