[DML] Re: Steering wheel removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Steering wheel removal


On my car, i took off the steering column, the steering column in 
the left hand, a soft hammer (mallet) in the right. two good blows 
on each side of the steering wheel and that's it. You can do the 
same without dismounting the steering column.
It works even if the steering wheel is heavily blocked, simple and 

Best regards,


--- In dmcnews@xxxxxxxxxxxxxxx, "Mike Cohee" <billsfanmd@xxxx> wrote:
> I wish I had the exact thread size but I can't recall it. Someone 
mailed me
> 2 bolts and I used them. They barely thread into the wheel. The 
problem is
> the length. It is very difficult to find that thread in the length 
you need.
> My steering puller kit came with 50 diff bolts and none worked! 
You need to
> take a bolt that has the right thread and then find it long enough 
at the
> store. Maybe someone on here can give you the exact bolt size. I 
think True
> Value or an older store has them. You are not alone in trying to 
find the
> bolts to do what is otherwise a simple job...
> Good luck
> Mike C
> 2109

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive