Re: [DML] Minimum rotor thickness?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Minimum rotor thickness?

I realize now how thin that is , lol.

I just had my rotors turned, well, just the front ones.  I just ordered some 
shims because the squeal like heck now. Even with anti-squeal grease between 
the calipers and pads. I was just trying to answer someone elses question 
about the rotor thickness.  I just remember seeing the 7mm.

Thanks Rob...

Lingo #2034

> Lingo,
> I didn't see anyone correct this so let me add that the minimum is 11.7mm
> Not That thickness is closer to a motorcycle rotor's but the pistons
> would jamb in the calipers and lock up the brakes the first time you 
> applied
> them. Don't worry as I'm sure your rotors are not that thickness for the
> above reason!
> Rob Grady
> P.J.Grady Inc.

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive