Re: [DML] Minimum rotor thickness?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Minimum rotor thickness?



I knew there was a seven in there somewhere. :-)  The 12 was covered up with 
rust I guess.


----- Original Message ----- 
From: "Kevin Milliken" <kevin.milliken@xxxxxxxxxxxxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, October 26, 2005 5:53 AM
Subject: RE: [DML] Minimum rotor thickness?


> Hi Lingo
>
> The size is 12.7mm it is printed on the edge and the workshop should see
> this and
> not machine them past thickness.
>
> Regards
>
>
> Kevin
>
[moderator snip]




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated