RE: [DML] Parking brake fitting & adjustement

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Chris, 
If you take out the pin and screw the large screw in till the pads are where
you want them while turning the rotor and put the pin back in. Or, You can
also take the pin out and lift up on and release the handle a few times and
they will self adjust. The self adjust just might be a little to tight.
John Hervey

 

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Chris Williams
Sent: Friday, October 14, 2005 11:09 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Parking brake fitting & adjustement

Hi All,

I am about to fit a new parking brake arm & base plate, along with 
replacing the rear pads and parking brake pads. I seem to remember 
somewhere a procedure for setting the adjustment on the parking brake 
pads, but despite searching for this I can no longer find it. If any 
one can point me in the right direction and or explain the procedure 
it would be appreciated.
thanks to all

Chris
Vin#4584
www.delorean-hire.co.uk








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links



 







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/