RE: [DML] Recommended Steering Wheel Puller?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Recommended Steering Wheel Puller?

Dave and Group, I have plenty of 7mm bolts and 7mm threaded rod in stock.
John Hervey

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Dave Swingle
Sent: Monday, September 19, 2005 4:08 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Recommended Steering Wheel Puller?

7MM screws are hard to find, and 7MM threaded rod was even worse. 

After struggling with that 7 mm problem for a while and then 
stripping it out (my wheel had been loctited on) I determined that it 
made a bunch more sense just to tap the puller holes out to 1/4-20 
(it might have been 5/16"). Then the bolts in the commercial puller 
will fit, AND the threads are somewhat meatier than thos tiny 7 mm 

Dave Swingle

To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see

To search the archives or view files, log in at 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive