[DML] DIN Stereo Mounting Plates (was: Re: Radio)

["James Espey" <james@xxxxxxxxxxxx>]

This would be interesting to see - got any photos of it? Sounds like
an interesting design.

James

--- In dmcnews@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> An interesting nugget that I discovered n right-hander #5565 went as 
> follows.
> 
(SNIP)
> Anyway, in removing the old Craig stereo, I discovered that rather than 
> having the knobs mounted to the stereo bracket as per usual, they were 
> mounted to a specially (and very well) made surround which clipped into 
> the DIN hole cut into the bracket. In addition to this there was a tray 
> underneath the stereo, welded to the normal bracket and at the back 
> edge, a quite intricately made clip-on bracket that secured the rear of 
> the stereo by the security mount at the back. This basically meant that 
> the Craig was held perfectly securely, and could be removed and
replaced 
> with a DIN unit with no mods whatoever. Very ipressive workmanship in 
> its simplicity and effectiveness.
> 
> Martin

>
>http://www.usadmc.com/dmcstore/ViewPart.asp?PID=3122&Qty=1&ShowCart=true
> >
> >James Espey
> >DMC (Texas)
> >http://www.delorean.com
> >800/USA-DMC1








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/