[DML] Missing Fuel Air Mixture Screw
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Missing Fuel Air Mixture Screw

I was about to check into the fuel air mixture for my idle problem.  
After pulling the plastic plug from the hole, I come to find out 
that I have no fuel-air mixture screw!  My 3 mm allan wrench simply 
passes through the open hole to the air flap mechanism (sorry for 
the nontechnical term for this).  A little hard to adjust without a 

Is there a replacement for this (the parts manual just indicates the 
rubber plug), or can I buy at a local hardware store?  Also, it 
looked like there were no threads in the hole.  Do I need to tap it?

Anyone else come across this?

To refresh, my idling problem is this.  Relatively smooth idle 
before I changed water pump, plugs, wires, distributor and cap. 
After the job, my cold idle seems smooth, but when engine reaches 
temperature, the idle goes up and down, almost stalling then catches 
up with a quick rev. It stalled a couple of time, too.  I am still 
looking for vacuum leaks as directed by some of you,  but wanted to 
investigate the mixture as well.



To address comments privately to the moderating team, please address:

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive