Re: [DML] valve adj
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] valve adj



Rod bearings 'hammer', mine is definitly a valve knock. As far as #4 
valves, my findings are the #4 exhaust valve has clearance no matter 
what stoke it is as long as it's #1 TDC 0 deg. I think it may even 
have clearance on #6 TDC mark O deg. -----Dani B. #5003



--- In dmcnews@xxxxxxxxxxxxxxx, mike.griese@xxxx wrote:
> Have you checked your bottom end bearings?  They will knock if they 
are 
> failing.
> 
> --
> Mike
> 








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive