Re: [DML] Rear Louvers hitting stainless T-Panel
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Rear Louvers hitting stainless T-Panel



In addition to adjusting the "goal post" you may have to adjust the
engine cover. It can be done by removing the rear trim inside the
passenger commpartment and loosening the 4 nuts that hold the hinges
for the engine cover. It can be moved foward and back. It should not
rub on the rear facia and it should pop up when you pull the release
handle.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Joseph Kuchan" <josephkuchan@xxxx> wrote:
> You probably already know this but the little "goal post" shaped bar
that 
> the louver's latch assembly grabs onto when it locks down is also
somewhat 
> adjustable. The holes it mounts in are actually slots and by
loosening the 
>







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 





Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive