[DML] Re: Followup on transmission flange seal fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Followup on transmission flange seal fix



The spindle nuts are either 31mm or 32mm, I'm leaning more towards 
32mm though, I can't quite remember exactly. -----Dani B. #5003

--- In dmcnews@xxxxxxxxxxxxxxx, "ksgrimsr" <knut.s.grimsrud@xxxx> 
wrote:
> Thanks for the insights.
> 
> 36mm sounds familiar... I'll have to check my toolchest when I get 
> home, but that wouldn't by chance be the same size as the spindle 
nut?
> 
>    Knut
> 
> 
> --- In dmcnews@xxxxxxxxxxxxxxx, "stainlessilusion" <5n-@xxxx> wrote:
> > I believe it's 36mm. I got mine at advance auto, both impact and 
> > regular 36mm sockets. Haven't tried to pull the pulley, I needed 
the 
> > socket to turn the crank, was planning on replacing the seal 
behind 
> > the pulley but turned out to be something else leaking so I never 
> had 
> > to pull the pulley. I'm sure you'll need a puller though. I have 
yet 
> > to work on an [undamaged] engine where the crank pulley just 
slides 
> > right off. -----Dani B. #5003







To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive