RE: [DML] Window Tracks
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Window Tracks



Martin,

Actually I've never seen a "factory installed" door glass creep in its
runner. Urethane is very strong (seven times stronger than silicone) so you
must have encountered a glass that was re-bonded with butyl tape or some
other inferior product. That's just my two cents...no point to prove so
let's not argue OK? BTW Paul don't bend your tracks as they can be adjusted.


Rob Grady

-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx] On Behalf Of
Martin Gutkowski
Sent: Friday, July 29, 2005 2:19 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: Re: [DML] Window Tracks

The windows can creep over 25 years in their runner and it's easier to 
pull the window off the runner and re-glue it back where it should be. 
Don't ask me why they do it but we recently re-bonded one that had moved 
over half an inch - you could see the marks on the glass

Martin

sweetp01569 wrote:

>I recently repaired the plastic guides on my driver's side window with 
>the large washer fix.  It now stays on the guide, but the window seems 
>to be too far back to line up properly to close all the way without 
>jamming against the rear part of the opening.  Can the metal tracks be 
>gently bent to the make sure the window lines up with the opening as 
>it closes?  
>
>Thanks,
>
>Paul
>
>  
>






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links



 



-- 
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 7/28/2005
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 7/28/2005
 





To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive