[DML] Help with rotors!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Help with rotors!



I am attempting to rebuild my brakes. I got all four calipers off, but 
am having problems getting the hubs/rotors off.  They are all pretty 
glazed and all I wanted to do was to take them off and get them turned 
at a local garage.  Per the manual, once I get the hub nut off on 
either the front or back, it just says to pull the disc right off.  

After a rubber mallet on my front driver's side, ball bearings from 
the back spilled out, which I thought were sealed.  I can't mallet the 
passenger side off.  The rears has some sort of friction retaining 
push washer over the threads and pushed inside.  I thought a rubber 
mallet again might help, but it seemed to loosen the drive axle joint 
behind it, instead.

I need help! How do I get the rotors off?

Thanks,

Paul






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive