Re: [DML] Radiator air flow and license plate
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Radiator air flow and license plate



The plate was always meant to be up on the bumper, which is why many cars 
have the factory bracket installed there.    Grady and Hervey sell the stainless 
license plate holder, which holds the plate up along the bumper without 
needing to drill any more holes in the car.   It uses existing bolts.   I think 
putting the plate in front of the radiator is a bad idea if you drive your D a 
lot, it appears to block a lot of airflow as you mentioned.   Why risk 
overheating because of a stupid license plate?

-Patrick C.
1880


[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN 


Copyright © 2018 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive