Re: [DML] Trans noise

["painterdave72" <painterdave72@xxxxxxxxx>]

--- In dmcnews@xxxxxxxxxxxxxxx, Warren Wallingford <warren@xxxx> wrote:
> 
Hey Warren and others I took the trans back out this evening.. only took a half 
hour this time... I turned the flywheel and it made a rubbing noise for a few 
turns and then stopped.. whats up with that?? im gonna take it back off 
tomorrow and see what the hell is going on.. is it on wrong?? i marked it when 
I took it off and put it back on the same way so I dont know.. Thanks for 
help..Dave...vin..15275




I'd be afraid of the throw-out bearing.  It has to 'click' into place on 
> the clutch fork.  If it's in wrong it can wear a ridge in the fingers of 
> the pressure plate. Their ends will eventually break off.
> Warren at DMC
> 
> 
> painterdave72 wrote:
> > 
> > 
> > Hey all I jsut got finished with the clutch install in my car and started it up 
and 
> > it is making this rubbing noise... was really loud for a minute then quited 
up 
> > some when i let the car run for a few minutes..








To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/